Green aventurine donut with a 4 cm diameter. It's about 4mm high and has a hole of 8 mm. This makes it suitable for the donut pendant and donut clips.

Carnelean donut of about 2,5 x 0,5 cm. It has a 4 mm hole, so it's only suitable for a cord or ribbon.

Amethist donut / pi stone of approx. 4 x 0,6 cm. It has a 1 cm hole and is suited for the donut pendants.

Carnelean donut / pi stone of approx. 4 cm. This donut has an 8 mm hole, so it fits both types of donut pendants for this size.

This set of 2 mini red jasper donut can be used with the special changeable donut earrings.

This set of 2 mini agate donut can be used with the special changeable donut earrings.

Sun stone donut / pi stone in various sizes. The hole is approx. 4 or 5 mm, so it will only fit a cord or ribbon.

Available sizes:
3 cm : approx. 3 cm x 0,5 cm (2 available)
3,5 cm: approx. 3,5 cm x 0,5 cm (4 available) />5 cm: approx. 5 x 0,55 cm (1 available)

Aragonite donut of approx. 3,5 x 0,4 cm with donut pendant on a gift card. The pendant is suited for donuts between 3 and 4 cm.

Amethyst donut / pi stone with a 3 cm diameter. The hole is 1 cm/ It fits both types of donut pendants for this size. A few of the donuts have a small blemish, hence the discounted price. They a bit of a 'fault line' that you can feel.

Orange aventurine donut of approx. 3,5 x 0,4 cm with donut pendant on a gift card. The pendant is suited for donuts between 3 and 4 cm.

Shungite pendulum, approx 3-4 cm long and 1,5/1,7 cm wide. Most of them weigh in at about 10g. The flat chainlet is approx 18 cm long and finished with a clear quartz bead. ***Adjusted price because of visible glue residue***

*****STOCK-CLEARANCE, part of our overstock at a discount*****

Miron series 3 pipette cap for 10 ml Orion DIN18 bottle, standard height. This cap fits the standard 10 ml bottle FL-10-63 and has a tamper-evident ring. It doses 0.7 ml at a time. Miron article number PVO-III-G0.7-FL10-63-SW. This is the series 3 cap with the wider rim at the bottom of the cap and it's made from plastic, glass and elastomere.

Bag containing 202 pcs. Also available individually.

This labradorite donut / pi stone is about 2,75 x 0,4 cm. It has a straight edge. The hole is 5 mm, which makes it suitable for 2 mm wax cord or 1,5 mm leather cord. Or a ribbon, of course.

This set of 2 mini chalcedony donut can be used with the special changeable donut earrings.

Green aventurine donut of approx. 3,5 x 0,4 cm with donut pendant on a gift card. The pendant is suited for donuts between 3 and 4 cm.

Sun stone donut / pi stone in various sizes. The hole is approx. 4 or 5 mm, so it will only fit a cord or ribbon.

Available sizes:
3 cm : approx. 3 cm x 0,5 cm (2 available)
3,5 cm: approx. 3,5 cm x 0,5 cm (4 available) />5 cm: approx. 5 x 0,55 cm (1 available)

This set of 2 mini rose quartz donut can be used with the special changeable donut earrings.

This light has 4 coloured leds. It's made from silver grey plastic and about 3 cm high with a diameter of 7 cm. The top is flat, so you would need a stand if you want to put a sphere on it. it takes 3 AAA batteries (not included) and has an adapter connector (also not included).

CLEARANCE SALE: Overstock of 70 x Miron pipette cap for Orion 50 ml DIN18 bottle, with tamper-evident ring. Miron article number PVO-III-G0.7-FL50-SW. This is the series 3 cap with wider rim at the bottom of the cap. The pipette doses 0,7 ml at a time and it's made from plastic, glass and elastomere.

Bag containing 70 pcs. Also available individually.

WHILE STOCK LASTS

This tiger's eye donut has a 3 cm diameter. The hole is about 5 mm, which means it will NOT fit the exchangeable donut pendants. It will fit a 2 mm wax cord, 1,5 mm leather cord or a ribbon.

Fluoriet donut / pi stone of about 4 x 0,6 cm. It has a 1 cm hole, which makes it suitable for the donut pendant and 4 cm donut clip.

Shungite pendulum, approx 3-4 cm long and 1,5/1,7 cm wide. Most of them weigh in at about 10g. The flat chainlet is approx 18 cm long and finished with a clear quartz bead. ***Adjusted price because the eyelets of these three pendulums are off-center***

This brecciated jasper donut has a star-shape. It's about 3,5 cm in diameter. The hole is approx 1 cm and it fits the donut pendant with stem.

Amazonite donut / pi stone from India, approx. 2,75 x 0,4 cm. The hole is 5 mm, so it's NOT suited for a donut pendant. This is also very light coloured amazonite.

These gilded silver earrings can be used with the mini donuts (15mm). The donuts can easily be changed by sliding them on the earrings.

The earrings are supplied without mini-donuts, the extra image gives an impression of how they look in combination with the donuts.

Please not that the shape of these earrings makes them quite vulnerable, they bend easily, so handle with care and keep them stored in a box to protect them.

This iron incense burner has a black coating and a wooden knop that is finished with a metal nail. It can be used for all kinds of incence like sticks and cones, but also for herbal incense and incense resin. Fill it for about 2/3 with fine sand or pebbles and it's ready for use. 

The incense burners we have in stock have a rust spot on the nail. Other than that, they are really nice, but we offer them at a discount because of the rust spot.

This moss agate donut / pi stone has a 4 cm diameter. It has a 1 cm hole and fits the donut pendants.

This opalite donut / pi stone has a 4 cm diameter. The hole is 1 cm, which makes it suitable for donut pendants.

Sun stone donut / pi stone in various sizes. The hole is approx. 4 or 5 mm, so it will only fit a cord or ribbon.

Available sizes:
3 cm : approx. 3 cm x 0,5 cm (2 available)
3,5 cm: approx. 3,5 cm x 0,5 cm (4 available) />5 cm: approx. 5 x 0,55 cm (1 available)