spray, pump and roll-on caps

Nasal spray cap for DIN 18 bottles. White plastic cap with transparant protective cap. Fits DIN18 20 ml and 30 ml  bottles.
 

Miron screw cap with pre-installed roll-on fitment. This version has a white matte plastic ball in a transparant fitment. Miron article number SV-KPM-D18-FTR-SW or SV-RO-D18-SW. Black plastic cap, fits all DIN18 bottles

Miron DIN 18 screw cap with roll-on fitment. Miron article number: SV-KES-D18-FSW-SW. The fitment is black with a polished metal ball, with a black plastic protective cap. This cap is not tamper evident.

Specifications:
Height: 31 +/- 0,2 mm (may be 0.2 mm bigger or smaller)
Diameter: 22,5 mm
Weight: 8,4 gr
Shape: round
Threadnorm: DIN 168 / GL 18
Material Urea molding compound UF
Colour: black (cap and fitment are black, the ball is polished metal)
Tamper evident ring: n/a
Roll-on fitment is pre-assembled in the cap

Miron DIN 18 screw cap with roll-on fitment. Miron article number: SV-KGP-D18-FSW-SW. The fitment is black with a polished clear glass ball and it's pre-installed in the glossy plastic cap. This cap fits all DIN18 bottles and has no tamper-evident ring.

Specifications:
Height: 31 +/- 0,2 mm (may deviate 0.2 mm either way)
Diameter: 22,5 mm
Weight : 8,4 gr
Shape: round
Threadnorm: DIN 168 / GL 18
Material Urea molding compound UF
Colour: black (cap and fitment are black, the ball is clear polished glass)
Tamper evident ring: n/a
Roll-on fitment is pre-assembled in the cap

Miron Metropolitan DIN18 black plastic pump cap with black protective cap. This cape doses 0,10 ml at a time. The protective cap is half open and covers the nozzle. This pump cap is availabe with various tube lengths. At the moment, we carry the 10, 30, 50, 60 and 100 ml versions. For 5-15-20 ml Orion bottles they will be available shortly. In the mean time the tube can easily be shortened by cutting it diagonally at the bottom twice. This creates the v-shape that is needed for the fluid to reach the bottom of the tube from all sides.

When shortening the tube, please ensure that it is not pressed further into the cap. This can cause a little bit of a malfunction where you'd have to pump the cap more times to get the fluid out. If this happens, you can easily solve it by pulling the tube back down a little.

It's important to note that this cap will leak when the bottle ends up vertically upside down, like when it's being carried around in a bag where it gets moved around. Horizontal is fine, but vertically upside down opens the mechanism and causes the contents to leak out slowly. 

Specifications :
Height : 40 + 1,2 mm / - 1,4 mm
Diameter: 23 +/- 0.2 mm
Weight 5 gr
Thread norm : DIN 168 / GL 18
Material: PP (polypropylene)
Colour: black



Protective cap
Colour: black



Pump cap
Volume: 0,10 ml
Material of seal: Rubber
Material of tube PP / PE (polyethylene)
Colour of tube: Transparant
Length of tube: 122 +/- 1 mm

Miron DIN18 black plastic spray cap Classic, transparant protective cap. Doses 0,14 ml at a time. Miron article number SPV-D0.14-D18-KTR-SW.

This cap fits all DIN18 bottles, the tube has the length needed for a 100 ml bottle and can be shortened for smaller bottles by cutting it diagonally at the bottom twice. This creates the v-shape that is needed for the fluid to flow easily into the tube.

When shortening the tube, please ensure that it is not pressed further into the cap. This can cause a little bit of a malfunction where you'd have to pump the cap more times to get the fluid out. If this happens, you can easily solve it by pulling the tube back a bit.

Specifications
Height : 41 + 1.2 - 1.4 mm (may be 1,2 mm longer or 1,4 mm shorter)
Diameter: 23 +/- 0.2 mm (may deviate 0,2 mm either way)
Height 6 gr
Thread norm : DIN 168 / GL 18
Material: PP (polypropylene)
Colour: black



Protective cap
Colour: black

Spray cap
Volume: 0,14 ml
Material of seal: Rubber
Material of tube PP / PE (polyethylene)
Colour of tube: Transparant
Length of tube: 122 +/- 1 mm

Miron DIN18 mist sprayer Classic with black protective cap. Dosage 0.14 ml at a time.

This cap fits all DIN18 bottles, like the Orion dropper bottles. If there is not enough stock in a size, you could order a sprayer with a longer tube and shorten it. The tube can be shortened for smaller bottles by cutting it diagonally upwards at the bottom in two directions. This creates the v-shape that is needed for the fluid to flow easily into the tube.

When shortening the tube, please ensure that it is not pressed further into the cap. This can cause a little bit of a malfunction where you'd have to pump the cap more times to get the fluid out. If this happens, you can easily solve it by pulling the tube a little lower.

Miron item ids:
ABB02A3B044-200 (Orion 5 ml)
ABB02A3B043-200 (Orion 10 ml 63 ml hoog)
ABB02A3B042-200 (Orion 10 ml 70 ml hoog)
ABB02A3B041-200 (Orion 15 ml)
ABB02A3B040-200 (Orion 20 ml)
ABB02A3B039-200 (Orion 30 ml)
ABB02A3B038-200 (Orion 50 ml)
ABB02A3B037-200 (Orion 60 ml)
ABB02A3B036-200 (Orion 100 ml)

Specifications :
Height : 41 + 1.2 - 1.4 mm
Diameter: 23 +/- 0.2 mm
Weight 6 gr
Thread norm : DIN 168 / GL 18
Material: PP (polypropylene)
Colour: black



Protective cap
Colour: black



Spraycap
Volume: 0,14 ml
Material of seal: Rubber
Material of tube PP / PE (polyethylene)
Colour of tube: Transparant
Length of tube: 122 +/- 1 mm