Dowsing Wands

Replacement antenna with clog for Just Flow adjustable dowsing wand. The clog is about 3 cm long and it weighs 1,6 g. The antenna can be replace by loosening the screw with a mini screwdriver. The material of the clog is beech and it is finished with a water-based varnish. The metal is zinc-coated steel. Total length approx. 27 cm.
The head of this antenna is slightly lighter than the ring. For comparison: the ring weighs about 2,5 g and the ball antenna head weighs about 3 g.

This dowsing wand has a wire with an orb of stone at the end and a spiral shaped part that is made of spring-steel. The spiral shape absorbs the movements of the wire, which decreases the odds of breaking. The handle is made of soapstone and is quite small, approximately 8.5 cm long and 1.75 cm wide. In comparison, the Just Flow dowsing wands are approximately 11.5 cm long and 2 cm wide at their widest point. The colour of the handle and the orb is dark gray. Furthermore, an OHM sign is engraved in the handle.

This dowsing wand comes in a storage box made from cardboard covered with red paper. The boxes used to be in a plastic bag, but as of late, they have done away with that and stuck the label from the wholesaler straight onto the box, and removing it damages the paper a bit. A photo of this is included so you can determine whether or not this is a deal breaker for you. 

This adjustable dowsing wand has a socket in the bottom of the handle to which the included cable can be connected. The cable has two 4 mm connectors.

Handle and ring are made from beech and finished with a wax. The ring has a 35 mm diameter and the size of the handle is 18 mm x 14 cm. Total length of the dowsing wand:

The antenna on this dowsing wand is quite long and can be shortened a bit if needed by cutting a piece off with pliers. The diameter of the antenna is 0.8 mm
 

A professionally made dowsing wand with a quartz ball. Its beech handle is finished with wax and its wire is galvanised. The dowsing wand is 45,5 cm long and has a small clear quartz ball at the end. Furthermore, the wire is adjustable. It is possible to make the wire a 1 cm longer, to swap the wire with a different wire or to make the wire shorter with a pair of pincers. The dowsing wand is delivered in a white, cardboard storage tube.

This dowsing wand has a wire with a metal end and a spiral shaped part that is made of spring-steel. The spiral shape absorbs the movements of the wire, which decreases the chance of it breaking. The handle is made of wood and is quite small, approximately 9 cm long and 1.5 cm wide. In comparison, the Just Flow dowsing wands are approximately 11.5 cm long and 2 cm wide at their widest point.

The head is quite heavy, so it might be not suitable for beginners. It's possible, but it takes a lot more patience as it will usually take longer to get it to move.

The wire is adjustable, so it is possible to choose which length works best for you. The wire can be changed, however, the handle is NOT suitable for the wires of the other adjustable dowsing wand, and unfortunately, there is no replacement antenna for this dowsing wand.

This dowsing wand comes in a storage box made from cardboard covered with red paper. The boxes used to be in a plastic bag, but as of late, they have done away with that and stuck the label from the wholesaler straight onto the box, and removing it damages the paper a bit. A photo of this is included so you can determine whether or not this is a deal breaker for you. 



 

A small, straight screwdriver for adjusting the antenna of the adustable dowsing wand Just Flow. The screwdriver is 4,5 cm long, the handle has a diameter of 6 mm and the blade (the part you put on the screw) is 2 mm wide.