Pendants - Donuts

Prase donut / pi stone with a 3 cm diameter. The hole is 8 mm and it's suitable for both types of donut pendants for this size.

Red jasper donut / pi stone with a 3 cm diameter. It has a 6 mm hole, which means it will NOT fit any of the donut pendants.

Red jasper donut / pi stone with a 3 cm diameter. The hole is 8 mm. It fits both types of donut pendants for this size.

Rhodocrosite donut / pi stone of approx. 3 cm. A-quality from Peru. It has an 8 mm hole and will fit both types of pendants for this size. You will receive one of the donuts from the picture.

Square rose quartz donut of about 3 x 3 x 0,4 cm. It has a 1 cm hole and fits on the donut pendants for this size.

Rose quartz donut of about 3 x 0,4 cm. The hole is 1 cm, so it can be used with a donut pendant or on a cord or ribbon.

This pendant enables you to wear a donut / pi stone on a necklace. By sliding the donut on the stem you instantly create a custom pendant to wear on a necklace or cord. The pendant is suitable for donuts with a diameter of of 3 to 4 cm that have a center hole of at least 7 mm. It is made from rhodinated silver (silver that's been coated with a thin layer of rhodium to prevent oxidising). Donut not included, the extra picture shows an example with a 3 cm shungite donut.

This silver clip holds a 4 cm donut / pi stone so you can wear it on a chain. 925 Silver

This pendant can only be used with donuts that have a hole of 8mm or more and a diameter of 4 cm. The extra pictures show a step-by-step guide. Donut not included

This silver clip holds a 3 cm donut / pi stone so you can wear it on a chain. 925 Silver

This pendant can only be used with donuts that have a hole of 8mm or more and a diameter of 3 cm (or 3 x 3 cm square donuts). The extra pictures show a step-by-step guide. Donut not included

This silver clip holds a 4 cm donut / pi stone so you can wear it on a chain. 925 Silver

This pendant can only be used with donuts that have a hole of 8 mm or more and a diameter of 4 cm. The extra pictures show a step-by-step guide. Donut not included

This pendant can be used to wear a donut / pi stone on a necklace. The donut / pi stone needs to have a hole that is at least 7 mm in diameter for this pendant to fit. It's made from nickel free imitation rhodium.

The pendant fits 3 and 4 cm donuts, with 3 cm donuts, part of the stem of the pendant will remain visible. Donut / pi stone not included, the extra picture shows an example with a 3 cm shungite donut.

Sun stone donut / pi stone in various sizes. The hole is approx. 4 or 5 mm, so it will only fit a cord or ribbon.

Available sizes:
3 cm : approx. 3 cm x 0,5 cm (2 available)
3,5 cm: approx. 3,5 cm x 0,5 cm (4 available) />5 cm: approx. 5 x 0,55 cm (1 available)

Sun stone donut / pi stone in various sizes. The hole is approx. 4 or 5 mm, so it will only fit a cord or ribbon.

Available sizes:
3 cm : approx. 3 cm x 0,5 cm (2 available)
3,5 cm: approx. 3,5 cm x 0,5 cm (4 available) />5 cm: approx. 5 x 0,55 cm (1 available)

Sun stone donut / pi stone in various sizes. The hole is approx. 4 or 5 mm, so it will only fit a cord or ribbon.

Available sizes:
3 cm : approx. 3 cm x 0,5 cm (2 available)
3,5 cm: approx. 3,5 cm x 0,5 cm (4 available) />5 cm: approx. 5 x 0,55 cm (1 available)

This tiger iron donut has a 3 cm diameter and an 8 mm hole. It will fit both types of donut pendants for 3 cm donuts. Tiger iron is a natural combination of tiger's eye, red jasper and hematite.

This tiger's eye donut has a 3 cm diameter. The hole is about 5 mm, which means it will NOT fit the exchangeable donut pendants. It will fit a 2 mm wax cord, 1,5 mm leather cord or a ribbon.

Tree agate donut / pi stone of approx 3 cm in diameter. The center hole is 6 mm, so it will NOT fit the donut clips and pendants.