Pendants - Donuts

Dumortierite donut / pi stone of approx. 3 x 0,5 cm. The hole is about 8 mm, and it will fit both types of donut pendants. This item pertains to the three donuts at the front.

Fluorite donut / pi stone of about 3 x 0,6 cm. The hole is 1 cm. This donut will fit both types of pendants.

Fluoriet donut / pi stone of about 4 x 0,6 cm. It has a 1 cm hole, which makes it suitable for the donut pendant and 4 cm donut clip.

Gold obsidian donut / pi stone with a 3 cm diameter. It's about 5 mm high and has an 8 mm center hole. It will fit both types of donut pendants for this size. The image lists all donuts in this crystal type. The ones with the 8 mm center hole are the first two of the center row and the middle one from the bottom row.

Gold obsidian donut / pi stone with a 3 cm diameter. It's about 5 mm high and has an 6 mm center hole. This means it will NOT fit either donut pendant. The image lists all available gold obsidian donuts, but the difference is clearly visable.

Green aventurine donut of approx. 3,5 x 0,4 cm with donut pendant on a gift card. The pendant is suited for donuts between 3 and 4 cm.

This green aventurine has a 3 cm diameter and a 1 cm hole. It will fit both types of donut pendants.

Green aventurine donut with a 4 cm diameter. It's about 4mm high and has a hole of 8 mm. This makes it suitable for the donut pendant and donut clips.

Hematite donut / pi stone of about 3 cm. It has an 8 mm hole and will fit both types of donut pendants for this size.

Hematite crystal donut / pi stone with a 3 cm diameter. The center hole is about 6 mm, so it does NOT fit the donut clips and pendants.

Jade donut / pi-stone with a diameter of approx. 3 cm. The center hole is a little over 8 mm, so it will fit both types of donut pendants. As far as colour goes, these donuts range from dark green to white and everything in between.

This labradorite donut / pi stone is about 2,75 x 0,4 cm. It has a straight edge. The hole is 5 mm, which makes it suitable for 2 mm wax cord or 1,5 mm leather cord. Or a ribbon, of course.

Lapis lazuli donut / pi stone of approx. 3,7 cm x 0,5 cm. It has a 5 mm hole, which means it will only fit a cord or ribbon, or a long necklace.

Lepidolite donut / pi stone. Diameter: 3 cm. The center hole is 6 mm, which means it will NOT fit the donut pendants and clips.

Moss agate donut / pi stone of approx. 3 cm. It has an 8 mm hole and it fits both types of donut pendants.

This moss agate donut / pi stone has a 4 cm diameter. It has a 1 cm hole and fits the donut pendants.

3 cm onyx donut / pi stone. The hole is about 6 mm, so it will NOT fit the donut pendants. It's lovely on a cord or ribbon, though.

Onyx donut / pi stone with a 3 cm diameter. This donut has a 7 mm hole, meaning it will fit the donut pendants with stem, but not the hinged ones.

Onyx donut of approx. 3 x 3 x 0,6 cm. The hole is 1 cm and it will fit both types of donut pendants for this size.

Opalite donut / pi stone has a 3 cm diameter. The hole is 1 cm, so it will fit both types of donut pendants for this size.

This opalite donut / pi stone has a 4 cm diameter. The hole is 1 cm, which makes it suitable for donut pendants.